HS Code Chapter 72 | ABRAMS world trade wiki

*Small excerpt from the database.

72 IRON AND STEEL

Pig iron and spiegeleisen in pigs, blocks or other primary forms

- Non-alloy pig iron containing by weight 0,5 % or less of phosphorus

- Non-alloy pig iron containing by weight more than 0,5 % of phosphorus

- Alloy pig iron; spiegeleisen

-- Containing by weight more than 2 % of carbon

-- Containing by weight more than 55 % of silicon

- Ferro-silico-manganese

-- Containing by weight more than 4 % of carbon

- Ferro-silico-chromium

- Ferro-molybdenum

- Ferro-tungsten and ferro-silico-tungsten

-- Ferro-titanium and ferro-silico-titanium

-- Ferro-vanadium

-- Ferro-niobium

Ferrous products obtained by direct reduction of iron ore and other spongy ferrous products, in lumps, pellets or similar forms; iron having a minimum purity by weight of 99,94 %, in lumps, pellets or similar forms

- Ferrous products obtained by direct reduction of iron ore

Ferrous waste and scrap; remelting scrap ingots of iron or steel

- Waste and scrap of cast iron

-- Of stainless steel

- Waste and scrap of tinned iron or steel

-- Turnings, shavings, chips, milling waste, sawdust, filings, trimmings and stampings, whether or not in bundles

- Remelting scrap ingots

Granules and powders, of pig iron, spiegeleisen, iron or steel

-- Of alloy steel

Iron and non-alloy steel in ingots or other primary forms (excluding iron of heading 7203)

Semi-finished products of iron or non-alloy steel

-- Of rectangular (including square) cross-section, the width measuring less than twice the thickness

-- Other, of rectangular (other than square) cross-section

- Containing by weight 0,25 % or more of carbon

Flat-rolled products of iron or non-alloy steel, of a width of 600 mm or more, hot-rolled, not clad, plated or coated

- In coils, not further worked than hot-rolled, with patterns in relief

-- Of a thickness of 4,75 mm or more

-- Of a thickness of 3 mm or more but less than 4,75 mm

-- Of a thickness of less than 3 mm

-- Of a thickness exceeding 10 mm

-- Of a thickness of 4,75 mm or more but not exceeding 10 mm

-- Of a thickness of 3 mm or more but less than 4,75 mm

-- Of a thickness of less than 3 mm

- Not in coils, not further worked than hot-rolled, with patterns in relief

-- Of a thickness exceeding 10 mm

-- Of a thickness of 4,75 mm or more but not exceeding 10 mm

-- Of a thickness of 3 mm or more but less than 4,75 mm

-- Of a thickness of less than 3 mm

Flat-rolled products of iron or non-alloy steel, of a width of 600 mm or more, cold-rolled (cold-reduced), not clad, plated or coated

-- Of a thickness of 3 mm or more

-- Of a thickness exceeding 1 mm but less than 3 mm

-- Of a thickness of 0,5 mm or more but not exceeding 1 mm

-- Of a thickness of less than 0,5 mm

-- Of a thickness of 3 mm or more

-- Of a thickness exceeding 1 mm but less than 3 mm

-- Of a thickness of 0,5 mm or more but not exceeding 1 mm

-- Of a thickness of less than 0,5 mm

Flat-rolled products of iron or non-alloy steel, of a width of 600 mm or more, clad, plated or coated

-- Of a thickness of 0,5 mm or more

-- Of a thickness of less than 0,5 mm

- Plated or coated with lead, including terne-plate

- Electrolytically plated or coated with zinc

- Plated or coated with chromium oxides or with chromium and chromium oxides

-- Plated or coated with aluminium-zinc alloys

- Painted, varnished or coated with plastics

Flat-rolled products of iron or non-alloy steel, of a width of less than 600 mm, not clad, plated or coated

-- Rolled on four faces or in a closed box pass, of a width exceeding 150 mm and a thickness of not less than 4 mm, not in coils and without patterns in relief

-- Other, of a thickness of 4,75 mm or more

-- Containing by weight less than 0,25 % of carbon

Flat-rolled products of iron or non-alloy steel, of a width of less than 600 mm, clad, plated or coated

- Plated or coated with tin

- Electrolytically plated or coated with zinc

- Otherwise plated or coated with zinc

- Painted, varnished or coated with plastics

- Otherwise plated or coated

Bars and rods, hot-rolled, in irregularly wound coils, of iron or non-alloy steel

- Containing indentations, ribs, grooves or other deformations produced during the rolling process

- Other, of free-cutting steel

-- Of circular cross-section measuring less than 14 mm in diameter

Other bars and rods of iron or non-alloy steel, not further worked than forged, hot-rolled, hot-drawn or hot-extruded, but including those twisted after rolling

- Containing indentations, ribs, grooves or other deformations produced during the rolling process or twisted after rolling

- Other, of free-cutting steel

-- Of rectangular (other than square) cross-section

Other bars and rods of iron or non-alloy steel

- Of free-cutting steel, not further worked than cold-formed or cold-finished

- Other, not further worked than cold-formed or cold-finished

Angles, shapes and sections of iron or non-alloy steel

- U, I or H sections, not further worked than hot-rolled, hot-drawn or extruded, of a height of less than 80 mm

- L or T sections, not further worked than hot-rolled, hot-drawn or extruded, of a height of 80 mm or more

- Other angles, shapes and sections, not further worked than hot-rolled, hot-drawn or extruded

-- Obtained from flat-rolled products

-- Cold-formed or cold-finished from flat-rolled products

Wire of iron or non-alloy steel

- Not plated or coated, whether or not polished

- Plated or coated with zinc

- Plated or coated with other base metals

Stainless steel in ingots or other primary forms; semi-finished products of stainless steel

- Ingots and other primary forms

-- Of rectangular (other than square) cross-section

Flat-rolled products of stainless steel, of a width of 600 mm or more

-- Of a thickness exceeding 10 mm

-- Of a thickness of 4,75 mm or more but not exceeding 10 mm

-- Of a thickness of 3 mm or more but less than 4,75 mm

-- Of a thickness of less than 3 mm

-- Of a thickness exceeding 10 mm

-- Of a thickness of 4,75 mm or more but not exceeding 10 mm

-- Of a thickness of 3 mm or more but less than 4,75 mm

-- Of a thickness of less than 3 mm

-- Of a thickness of 4,75 mm or more

-- Of a thickness of 3 mm or more but less than 4,75 mm

-- Of a thickness exceeding 1 mm but less than 3 mm

-- Of a thickness of 0,5 mm or more but not exceeding 1 mm

-- Of a thickness of less than 0,5 mm

Flat-rolled products of stainless steel, of a width of less than 600 mm

-- Of a thickness of 4,75 mm or more

-- Of a thickness of less than 4,75 mm

- Not further worked than cold-rolled (cold-reduced)

Bars and rods, hot-rolled, in irregularly wound coils, of stainless steel

Other bars and rods of stainless steel; angles, shapes and sections of stainless steel

-- Of circular cross-section

- Bars and rods, not further worked than cold-formed or cold-finished

- Other bars and rods

- Angles, shapes and sections

Wire of stainless steel

Other alloy steel in ingots or other primary forms; semi-finished products of other alloy steel

- Ingots and other primary forms

Flat-rolled products of other alloy steel, of a width of 600 mm or more

-- Grain-oriented

- Other, not further worked than hot-rolled, in coils

- Other, not further worked than hot-rolled, not in coils

- Other, not further worked than cold-rolled (cold-reduced)

-- Electrolytically plated or coated with zinc

-- Otherwise plated or coated with zinc

Flat-rolled products of other alloy steel, of a width of less than 600 mm

-- Grain-oriented

- Of high-speed steel

-- Not further worked than hot-rolled

-- Not further worked than cold-rolled (cold-reduced)

Bars and rods, hot-rolled, in irregularly wound coils, of other alloy steel

- Of high-speed steel

- Of silico-manganese steel

Other bars and rods of other alloy steel; angles, shapes and sections, of other alloy steel; hollow drill bars and rods, of alloy or non-alloy steel

- Bars and rods, of high-speed steel

- Bars and rods, of silico-manganese steel

- Other bars and rods, not further worked than hot-rolled, hot-drawn or extruded

- Other bars and rods, not further worked than forged

- Other bars and rods, not further worked than cold-formed or cold-finished

- Other bars and rods

- Angles, shapes and sections

- Hollow drill bars and rods

Wire of other alloy steel

- Of silico-manganese steel