OOO Turon Stal Profil

The performance of a company depends heavily on its suppliers. Therefore, a reliable network of partners (suppliers, dealers and manufacturers) is elementary. In bills of lading, a total of 5 international suppliers of OOO Turon Stal Profil could be identified on which the company is relying. One of the suppliers is, for example, the company OOO Производственное Объединение Нижне-Волжский Трубный Завод, which delivered 14 shipments.

Get an overview of OOO Turon Stal Profil’s international procurement and its 5 suppliers with Company Transparency

Generally you can differentiate the supply chain or supply network of OOO Turon Stal Profil by two perspectives:

• The supplier side (a so-called Tier-1-supplier is a direct supplier, Tier-2 is a supplier of the Tier-1 supplier, Tier-n is a supplier at any level in the OOO Turon Stal Profil supply network).
• The buyer side (a so-called Tier-1 buyer is a direct buyer, Tier-2 is a buyer of the Tier-1 buyer, Tier-n is a buyer at any level in the OOO Turon Stal Profil distribution network).

To ensure business stability and continuity, a supply chain or supply network must be constructed in such a way that external influences can cause as little damage as possible to OOO Turon Stal Profil. This applies both in the area of procurement (the loss of a supplier must be covered by an alternative supplier) as in the area of sales (the loss of a buyer must be covered by an alternative buyer).

Risks can generally be considered as the non-availability of goods, through cutback or complete halt of production, or the potential loss of business partners, violating compliance rules (e.g. protection of the environment, labor legislation) and thus drop out of the supply network.

This risk should not necessarily be limited to the direct business partner (Tier 1), it involves the entire supply chain, unless sufficient alternative suppliers and buyers have been put in place.

Get an overview of the international supply chain of OOO Turon Stal Profil (upstream/procurement and downstream/sales) from Tier-1 to Tier-n

E.G.: Tier 1 supplier OOO Производственное Объединение Нижне-Волжский Трубный ЗаводTier-1 Buyer Oсoo Амир Строй Мега

ABRAMS world trade wiki not only shows direct suppliers and customers of the first tier (Tier-1). With just one click in our tool Supply Chain Intelligence you get a comprehensive insight into the supply network with multiple tiers (Tier-n) beyond the first tier.

Each tier in the supply chain or supply network on the supplier side of OOO Turon Stal Profil involves a single risk. The more tiers, the more difficult it is to analyze and monitor the business partners. Suppliers of suppliers are generally unknown, so there is already an increasing risk at the second (Tier 2) level.

If e.g. a first Tier supplier is not adding any value, the supply chain can be shortened and the risk of failure can be minimized by skipping this supplier. A previous Tier-2 supplier now turns into a Tier-1 supplier, which we call "go-direct". In our tool Supply Chain Intelligence as far as international suppliers are concerned, this analysis can be done with one click:

Analyze the potential of shortening and therefore stabilizing the supply chain of OOO Turon Stal Profil

Based on the analysis of international bills of lading (bill of lading/ bills of lading/ BOL), a total of 6 different product categories that have been purchased by OOO Turon Stal Profil, can be identified.

These are classified by means of HS codes (HTS codes or customs tariff numbers).

For example, HS code 720918 classifies the following products:

„Flat-rolled products of iron or non-alloy steel, of a width of >= 600 mm, in coils, simply cold-rolled "cold-reduced", not clad, plated or coated, of a thickness of < 0,5 mm". This HS code was sighted 66 times in total.

Get an overview of internationally purchased products by OOO Turon Stal Profil with Company Transparency

Each tier in the supply chain or supply network of OOO Turon Stal Profil is adding value and therefore costs. The more tiers, the more expensive the product gets. Supply chains are normally not very transparent, trade secrets are part of the survival tactics in each stage of the value chain, especially for trading companies.

If e.g. a Tier-1 supplier from OOO Turon Stal Profil that primarily trades a product and doesn’t add any value (only fulfills the distributor function) it is possible to shorten the supply chain and reduce purchasing costs. A previous Tier-2 supplier now turns into a Tier-1 supplier, which we call "go-direct". In our tool Supply Chain Intelligence as far as international suppliers are concerned, this analysis can be done with one click:

Analyze the potential of shortening the supply chain of OOO Turon Stal Profil and saving costs on the procurement side.

The performance of a company depends fundamentally on its buyers. Therefore, a largest possible base of stable buyers is crucial. A total of 9 international buyers of OOO Turon Stal Profil could be identified in bills of lading. For example, one of the buyers is the company Oсoo Амир Строй Мега, which has received 7 shipments.

Get an overview of the international sales and its 9 buyers of OOO Turon Stal Profil with Company Transparency.

Based on the analysis of international bills of lading (bill of lading/ bills of lading/ BOL), a total of 4 different product categories sold by OOO Turon Stal Profil, can be identified.

These are classified by means of HS codes (HTS codes or customs tariff numbers).

For example, HS code 722699 classifies the following products:

„Flat-rolled products of alloy steel other than stainless, of a width of < 600 mm, hot-rolled or cold-rolled "cold-reduced" and further worked (excl. products of high-speed steel or silicon-electrical steel)". This HS code was sighted 37 times in total.

Get an overview of internationally sold products by OOO Turon Stal Profil with Company Transparency

Each tier in the buyer side of the supply chain or supply network of OOO Turon Stal Profil is adding value and therefore costs. The more tiers, the more expensive the product gets. Supply chains are normally not very transparent, trade secrets are part of the survival tactics in each stage of the value chain, especially for trading companies.

If e.g. a Tier-1 buyer from OOO Turon Stal Profil that primarily trades products and doesn’t add any value (only fulfills the distributor function) it is possible to shorten the supply chain downstream giving a potential to optimize profit margins for OOO Turon Stal Profil. A previous Tier-2 buyer now turns into a Tier-1 buyer, which we call "go-direct". In our tool Supply chain Intelligence as far as international buyers are concerned, this analysis can be done with one click:

Analyze the potential to shorten the supply chain and optimize the profit margins on the sales side of OOO Turon Stal Profil

Each company contributes significantly minimizing risks for its buyers, through its own stability. Internal risks (endogenous factors) can be e.g. financially (financial ratios, free cash flow, balance sheets) or operationally (production, lead times). Since 2021, external risks have increased due to worldwide shortages and are an important factor as to whether a supplier such as OOO Turon Stal Profil can itself reliably deliver due to external dependencies (exogenous factors).

To assess this, data analysis should be conducted to get practical answers:

How is the supply chain or supply network structured on the supplier side of OOO Turon Stal Profil? Are there suppliers or products in the supply chain that are reported as critical, e.g. in international media?

The more constant outgoing shipments of a company’s, the easier it is to assess potential problems for a supplier like OOO Turon Stal Profil

Operational aspects like a stable supply chain, an in-house production and reliable logistics define sustainable performance.

Since 2021, global supply shortages have increasingly added external factors as to whether a supplier like OOO Turon Stal Profil can deliver reliably itself through dependencies.

Based on the statistical trend of shipments (in terms of the number of shipments and respectively the quantity of goods) the current supply and performance capacity can be indirectly analyzed.

The more constant incoming shipments, the better one can determine possible procurement problems of a company like OOO Turon Stal Profil

Since 2021, there are increasingly external factors due to global supply shortages, whether a company, no matter manufacturer or distributor, can reliably deliver through dependencies.

Based on the statistical trend of shipments (in terms of the number of shipments and respectively the quantity of goods) it is possible to analyze current procurement stability and thus ultimately also to derive an indication of the company’s delivery and performance capability.

Generally you can differentiate the competition of OOO Turon Stal Profil by the purchase and sales perspective.

• Start the competitive analysis on the purchase side.
• Start the competitive analysis on the sales side.

Competitors of OOO Turon Stal Profil on the purchase side (procurement of raw materials and components for production or distribution) are exposed on ABRAMs wiki under Competitive Intelligence, purchased products, classified by HS-Codes (e.g. 720918, 720839) or by top product terms.

Competitors on the sales side of OOO Turon Stal Profil (selling raw materials or components for production or distribution) are exposed on ABRAMS wiki under Competitive Intelligence, sold products classified by HS-Codes (e.g. 722699, 732690) or by top product terms.