Machinenfabric Rieter AG

Generally you can differentiate the supply chain or supply network of Machinenfabric Rieter AG by two perspectives:

• The supplier side (a so-called Tier-1-supplier is a direct supplier, Tier-2 is a supplier of the Tier-1 supplier, Tier-n is a supplier at any level in the Machinenfabric Rieter AG supply network).
• The buyer side (a so-called Tier-1 buyer is a direct buyer, Tier-2 is a buyer of the Tier-1 buyer, Tier-n is a buyer at any level in the Machinenfabric Rieter AG distribution network).

To ensure business stability and continuity, a supply chain or supply network must be constructed in such a way that external influences can cause as little damage as possible to Machinenfabric Rieter AG. This applies both in the area of procurement (the loss of a supplier must be covered by an alternative supplier) as in the area of sales (the loss of a buyer must be covered by an alternative buyer).

Risks can generally be considered as the non-availability of goods, through cutback or complete halt of production, or the potential loss of business partners, violating compliance rules (e.g. protection of the environment, labor legislation) and thus drop out of the supply network.

This risk should not necessarily be limited to the direct business partner (Tier 1), it involves the entire supply chain, unless sufficient alternative suppliers and buyers have been put in place.

Get an overview of the international supply chain of Machinenfabric Rieter AG (upstream/procurement and downstream/sales) from Tier-1 to Tier-n

E.G.: Tier-1 Buyer OOO Textile Finance Khorezm

ABRAMS world trade wiki not only shows direct suppliers and customers of the first tier (Tier-1). With just one click in our tool Supply Chain Intelligence you get a comprehensive insight into the supply network with multiple tiers (Tier-n) beyond the first tier.

Each tier in the supply chain or supply network on the supplier side of Machinenfabric Rieter AG involves a single risk. The more tiers, the more difficult it is to analyze and monitor the business partners. Suppliers of suppliers are generally unknown, so there is already an increasing risk at the second (Tier 2) level.

If e.g. a first Tier supplier is not adding any value, the supply chain can be shortened and the risk of failure can be minimized by skipping this supplier. A previous Tier-2 supplier now turns into a Tier-1 supplier, which we call "go-direct". In our tool Supply Chain Intelligence as far as international suppliers are concerned, this analysis can be done with one click:

Analyze the potential of shortening and therefore stabilizing the supply chain of Machinenfabric Rieter AG

The performance of a company depends fundamentally on its buyers. Therefore, a largest possible base of stable buyers is crucial. A total of 50 international buyers of Machinenfabric Rieter AG could be identified in bills of lading. For example, one of the buyers is the company OOO Textile Finance Khorezm, which has received 31 shipments.

An important destination country identified for the sale of products: Uzbekistan. 439 shipments of goods were shipped to this country in the period covered.

Get an overview of the international sales and its 50 buyers of Machinenfabric Rieter AG with Company Transparency.

Based on the analysis of international bills of lading (bill of lading/ bills of lading/ BOL), a total of 125 different product categories sold by Machinenfabric Rieter AG, can be identified.

These are classified by means of HS codes (HTS codes or customs tariff numbers).

For example, HS code 850132 classifies the following products:

„DC motors and DC generators of an output > 750 W but <= 75 kW". This HS code was sighted 114 times in total.

From the product descriptions of the analyzed bills of lading (bill of lading/ bills of lading/ BOL), the following products sold to various buyers can be identified as an example:

FOR 40028518-00984 \ K 48 \ 2023 Yarn check rail M T70 №10005885 (Планка для пряжи М Т70) 2шт. - вес: 1,8 кг 2. мест 1, 1 картон.короб. 8. 000 9. 000 10. 2023/FOR 40028518-00984 \ K 48 \ 2023 11. 02 1.

1. Части и принадлежности текстильного оборудования: FOR 40028518-00984 \ K 48 \ 2023 Botom apron Ri-Q A11KN 72.5x1 №11038545 (Резиновый нижний фартук Ri-Q A11KN 72,5x1) 194шт. - вес: 2,328 кг
2. часть места
3. 000
4. 02
5. Части и принадлежности текстильного оборудования: FOR 40028518-00984 \ K 48 \ 2023 Spring clip №0650-8016 (Пружинный зажим) 5шт. - вес: 0,01 кг
6. часть места
7. 000
8. 02
9. Части и принадлежности текстильного оборудования: FOR 40028518-00984 \ K 48
10. 1. Части и принадлежности текстильного оборудования:

FOR 40025221-00195 \ GK8 V2 \ 2023 Drafting roller motor 1,25kW 63-LC-PSM-FB4-23 №11103231 (Мотор вытяжного вала 1,25кВт.63-LC-PSM-FB4-23)-1шт. - кол. 1 шт, вес: 6,7 кг 2. мест 1, 1 карт.коробка 8. 000

1. Части и принадлежности текстильного оборудования: FOR 40025221-00195 \ GK8 V2 \ 2023 Drafting roller motor 1,9kW 63-LC-PSM-FB4-24 №11103232 (Мотор вытяжного вала 1,9кВт. 63-LC-PSM-FB4-24)-1шт. - кол. 1 шт, вес: 6,74 кг
2. палет
3. 000
4. 025
5. 2023/
6. 1. ПЕРХЛОРЭТИЛЕН (ТЕТРАХЛОРЭТИЛЕН) ТЕХНИЧЕСКИЙ ТУ 2412-010-48784726-2015; ПРИМЕНЯЕТСЯ В КАЧЕСТВЕ УНИВЕРСАЛЬНОГО РАСТВОРИТЕЛЯ В ПРОЦЕССАХ ОБЕЗЖИРИВАНИЯ МЕТАЛЛОВ; СРОК ГОДГОСТИ: 4 ГОДА., ДАТА ИЗГОТОВЛЕНИЯ: 13.05.2021 Г.; ПОСТАВЛЯЕТСЯ В 23 ПЛАСТИКОВЫХ БОЧКАХ
7. 1. 1 шт., Пластиковый штангенциркуль, 0-150 мм; Доставка из: Узбекистан; Цвет: Коричневый (Описание при ввозе: Штангенциркуль / 1PC Plastic Vernier Caliper Digital Display Caliper Mini Text Play Caliper Student Vernier Ruler 0 to 150mm Measuring ToolColor
8. Электрический паяльник 60 Вт с европейской вилкой, 1 шт., регулировка температуры, паяльник, бытовой электронный инструмент для сварки и ремонта; Тип вилки: EU; Доставка из: Узбекистан; Установите тип: С сварочные наконечники; Мощность: 60 Вт; Цвет: Те
9. 1. Части и принадлежности ткац.оборудования:

FOR 40027424-00320/G37/2022 Air guide element Retrofit GK7 №11306270
(Воздухонаправляющий элемент модифицированный GK7)-10шт. Упакованный яшик с металическами опорами

• вес: 42 кг

2. мест 1, 1 спец.упаковк
3. 1. Части и принадлежности текстильного оборудования:

FOR40019900-02224#1RoW/RoWN\2022 Drafting roller motor 1,25kW №11103231 (Мотор вытяжного вала 1,25кВт) -2шт.

• кол. 2 шт, вес: 13,4 кг

2. 0 часть места
3. 000
4. 025
5. 2023/новый
6. 02
7. Части и принадлежности текстильного оборудования: FOR40019900-02224#1RoW/RoWN\2022 Drafting roller motor 1,9kW №11103232 (Мотор вытяжного вала 1,9кВт) -2шт.

• кол. 2 шт, вес: 13,48 кг

2. 0 часть места
3. 000
4. 025
5. 2023/новый
6. 02
7. Части и принадлежности текстильного оборудования: FOR40019900-02224#1RoW/RoWN\2022 Ring frame motor 1.75kW №11103235 (Двигатель с кольцевой рамой 1,75 кВт)-2шт.

• кол. 2 шт, вес: 32 кг

2. мест 1, 1 1 спец.упаковка
3. 000
4. 025
5. 2023/новый 1
more product descriptions less product descriptions

Get an overview of internationally sold products by Machinenfabric Rieter AG with Company Transparency

Each tier in the buyer side of the supply chain or supply network of Machinenfabric Rieter AG is adding value and therefore costs. The more tiers, the more expensive the product gets. Supply chains are normally not very transparent, trade secrets are part of the survival tactics in each stage of the value chain, especially for trading companies.

If e.g. a Tier-1 buyer from Machinenfabric Rieter AG that primarily trades products and doesn’t add any value (only fulfills the distributor function) it is possible to shorten the supply chain downstream giving a potential to optimize profit margins for Machinenfabric Rieter AG. A previous Tier-2 buyer now turns into a Tier-1 buyer, which we call "go-direct". In our tool Supply chain Intelligence as far as international buyers are concerned, this analysis can be done with one click:

Analyze the potential to shorten the supply chain and optimize the profit margins on the sales side of Machinenfabric Rieter AG

Each company contributes significantly minimizing risks for its buyers, through its own stability. Internal risks (endogenous factors) can be e.g. financially (financial ratios, free cash flow, balance sheets) or operationally (production, lead times). Since 2021, external risks have increased due to worldwide shortages and are an important factor as to whether a supplier such as Machinenfabric Rieter AG can itself reliably deliver due to external dependencies (exogenous factors).

To assess this, data analysis should be conducted to get practical answers:

Which buyers does Machinenfabric Rieter AG consistently sell to over a long period of time that can be identified as a good reference?

The more constant outgoing shipments of a company’s, the easier it is to assess potential problems for a supplier like Machinenfabric Rieter AG

Operational aspects like a stable supply chain, an in-house production and reliable logistics define sustainable performance.

Since 2021, global supply shortages have increasingly added external factors as to whether a supplier like Machinenfabric Rieter AG can deliver reliably itself through dependencies.

Based on the statistical trend of shipments (in terms of the number of shipments and respectively the quantity of goods) the current supply and performance capacity can be indirectly analyzed.

Here you can see an analysis of shipments by Machinenfabric Rieter AG to international buyers in the last few months with Company Transparency

Generally you can differentiate the competition of Machinenfabric Rieter AG by the purchase and sales perspective.

• Start the competitive analysis on the purchase side.
• Start the competitive analysis on the sales side.

Competitors of Machinenfabric Rieter AG on the purchase side (procurement of raw materials and components for production or distribution) are exposed on ABRAMs wiki under Competitive Intelligence, purchased products, classified by HS-Codes or by top product terms.

Competitors on the sales side of Machinenfabric Rieter AG (selling raw materials or components for production or distribution) are exposed on ABRAMS wiki under Competitive Intelligence, sold products classified by HS-Codes (e.g. 850132, 844832) or by top product terms.