Accuform Mfg

Generally you can differentiate the supply chain or supply network of Accuform Mfg by two perspectives:

• The supplier side (a so-called Tier-1-supplier is a direct supplier, Tier-2 is a supplier of the Tier-1 supplier, Tier-n is a supplier at any level in the Accuform Mfg supply network).
• The buyer side (a so-called Tier-1 buyer is a direct buyer, Tier-2 is a buyer of the Tier-1 buyer, Tier-n is a buyer at any level in the Accuform Mfg distribution network).

To ensure business stability and continuity, a supply chain or supply network must be constructed in such a way that external influences can cause as little damage as possible to Accuform Mfg. This applies both in the area of procurement (the loss of a supplier must be covered by an alternative supplier) as in the area of sales (the loss of a buyer must be covered by an alternative buyer).

Risks can generally be considered as the non-availability of goods, through cutback or complete halt of production, or the potential loss of business partners, violating compliance rules (e.g. protection of the environment, labor legislation) and thus drop out of the supply network.

This risk should not necessarily be limited to the direct business partner (Tier 1), it involves the entire supply chain, unless sufficient alternative suppliers and buyers have been put in place.

Get an overview of the international supply chain of Accuform Mfg (upstream/procurement and downstream/sales) from Tier-1 to Tier-n

ABRAMS world trade wiki not only shows direct suppliers and customers of the first tier (Tier-1). With just one click in our tool Supply Chain Intelligence you get a comprehensive insight into the supply network with multiple tiers (Tier-n) beyond the first tier.

Each tier in the supply chain or supply network on the supplier side of Accuform Mfg involves a single risk. The more tiers, the more difficult it is to analyze and monitor the business partners. Suppliers of suppliers are generally unknown, so there is already an increasing risk at the second (Tier 2) level.

If e.g. a first Tier supplier is not adding any value, the supply chain can be shortened and the risk of failure can be minimized by skipping this supplier. A previous Tier-2 supplier now turns into a Tier-1 supplier, which we call "go-direct". In our tool Supply Chain Intelligence as far as international suppliers are concerned, this analysis can be done with one click:

Analyze the potential of shortening and therefore stabilizing the supply chain of Accuform Mfg

Based on the analysis of international bills of lading (bill of lading/bills of lading / BOL), 1 product category that has been purchased by Accuform Mfg can be identified by means of HS codes (HTS codes or customs tariff numbers).

It is classified with the HS code 392590, which groups following products:

„Building elements for the manufacture of floors, walls, partition walls, ceilings, roofs, etc., of plastics; gutters and accessories of plastics; railings, fences and similar barriers, of plastics; large shelves, for assembly and permanent installation in shops, workshops, etc., of plastics; architectural ornaments, e.g. friezes, of plastics; fittings and similar products for permanent mounting on buildings, of plastics". This HS code was sighted 1 time in total.

Get an overview of internationally purchased products by Accuform Mfg with Company Transparency

Each company contributes significantly minimizing risks for its buyers, through its own stability. Internal risks (endogenous factors) can be e.g. financially (financial ratios, free cash flow, balance sheets) or operationally (production, lead times). Since 2021, external risks have increased due to worldwide shortages and are an important factor as to whether a supplier such as Accuform Mfg can itself reliably deliver due to external dependencies (exogenous factors).

To assess this, data analysis should be conducted to get practical answers:

Sourcing products as regionally as possible with short shipping routes and the use of sustainable materials define the CO₂ footprint and sustainability of the products of any company, including Accuform Mfg

After many companies, predominantly due to cost savings, have been building their networks increasingly internationally for years, there is now an increasing trend of so-called “on-shoring” or “near-shoring”. Attempting to include suppliers who are the closest to the supply chain because of financial, risk, environmental and image aspects:

• Saving international freight costs, which have risen extremely since 2021.
• Minimizing risks caused by logistics problems (e.g. the Suez Canal obstruction in 2021)
• Attempting to reduce the carbon footprint when purchasing products.
• Setting and meeting sustainability goals for own products of Accuform Mfg

Based on the development of current shipments (in terms of number of shipments and quantity of goods) and changes in international suppliers and routes, it is possible to analyze the extent to which Accuform Mfg has already made efforts in recent months and years, to focus on environmentally relevant aspects, like carbon footprint and sustainability in its business activities.

Get an overview of the international shipments that have an impact on the CO₂ footprint, as well as the sustainability of Accuform Mfg

Generally you can differentiate the competition of Accuform Mfg by the purchase and sales perspective.

• Start the competitive analysis on the purchase side.
• Start the competitive analysis on the sales side.

Competitors of Accuform Mfg on the purchase side (procurement of raw materials and components for production or distribution) are exposed on ABRAMs wiki under Competitive Intelligence, purchased products, classified by HS-Codes (e.g. 392590) or by top product terms.

Competitors on the sales side of Accuform Mfg (selling raw materials or components for production or distribution) are exposed on ABRAMS wiki under Competitive Intelligence, sold products classified by HS-Codes or by top product terms.