Eskapet Ambalaj San. ve Tic. A.Ş.

Generally you can differentiate the supply chain or supply network of Eskapet Ambalaj San. ve Tic. A.Ş. by two perspectives:

• The supplier side (a so-called Tier-1-supplier is a direct supplier, Tier-2 is a supplier of the Tier-1 supplier, Tier-n is a supplier at any level in the Eskapet Ambalaj San. ve Tic. A.Ş. supply network).
• The buyer side (a so-called Tier-1 buyer is a direct buyer, Tier-2 is a buyer of the Tier-1 buyer, Tier-n is a buyer at any level in the Eskapet Ambalaj San. ve Tic. A.Ş. distribution network).

To ensure business stability and continuity, a supply chain or supply network must be constructed in such a way that external influences can cause as little damage as possible to Eskapet Ambalaj San. ve Tic. A.Ş.. This applies both in the area of procurement (the loss of a supplier must be covered by an alternative supplier) as in the area of sales (the loss of a buyer must be covered by an alternative buyer).

Risks can generally be considered as the non-availability of goods, through cutback or complete halt of production, or the potential loss of business partners, violating compliance rules (e.g. protection of the environment, labor legislation) and thus drop out of the supply network.

This risk should not necessarily be limited to the direct business partner (Tier 1), it involves the entire supply chain, unless sufficient alternative suppliers and buyers have been put in place.

Get an overview of the international supply chain of Eskapet Ambalaj San. ve Tic. A.Ş. (upstream/procurement and downstream/sales) from Tier-1 to Tier-n

E.G.: Tier-1 Buyer Brooklyn Bottling Co.Of Milton

ABRAMS world trade wiki not only shows direct suppliers and customers of the first tier (Tier-1). With just one click in our tool Supply Chain Intelligence you get a comprehensive insight into the supply network with multiple tiers (Tier-n) beyond the first tier.

Each tier in the supply chain or supply network on the supplier side of Eskapet Ambalaj San. ve Tic. A.Ş. involves a single risk. The more tiers, the more difficult it is to analyze and monitor the business partners. Suppliers of suppliers are generally unknown, so there is already an increasing risk at the second (Tier 2) level.

If e.g. a first Tier supplier is not adding any value, the supply chain can be shortened and the risk of failure can be minimized by skipping this supplier. A previous Tier-2 supplier now turns into a Tier-1 supplier, which we call "go-direct". In our tool Supply Chain Intelligence as far as international suppliers are concerned, this analysis can be done with one click:

Analyze the potential of shortening and therefore stabilizing the supply chain of Eskapet Ambalaj San. ve Tic. A.Ş.

Based on the analysis of international bills of lading (bill of lading/bills of lading / BOL), 1 product category that has been purchased by Eskapet Ambalaj San. ve Tic. A.Ş. can be identified by means of HS codes (HTS codes or customs tariff numbers).

It is classified with the HS code 392330, which groups following products:

„Carboys, bottles, flasks and similar articles for the conveyance or packaging of goods, of plastics". This HS code was sighted 1 time in total.

Get an overview of internationally purchased products by Eskapet Ambalaj San. ve Tic. A.Ş. with Company Transparency

The performance of a company depends fundamentally on its buyers. Therefore, a largest possible base of stable buyers is crucial. A total of 100 international buyers of Eskapet Ambalaj San. ve Tic. A.Ş. could be identified in bills of lading. For example, one of the buyers is the company Brooklyn Bottling Co.Of Milton, which has received 14 shipments.

Among 12 identified buying countries, an important target country to sell products to is: United States of America. 232 shipments of goods were shipped to this country in the period covered.

Get an overview of the international sales and its 100 buyers of Eskapet Ambalaj San. ve Tic. A.Ş. with Company Transparency.

Based on the analysis of international bills of lading (bill of lading/ bills of lading/ BOL), a total of 7 different product categories sold by Eskapet Ambalaj San. ve Tic. A.Ş., can be identified.

These are classified by means of HS codes (HTS codes or customs tariff numbers).

For example, HS code 392330 classifies the following products:

„Carboys, bottles, flasks and similar articles for the conveyance or packaging of goods, of plastics". This HS code was sighted 311 times in total.

From the product descriptions of the analyzed bills of lading (bill of lading/ bills of lading/ BOL), the following products sold to various buyers can be identified as an example:

Get an overview of internationally sold products by Eskapet Ambalaj San. ve Tic. A.Ş. with Company Transparency

Each tier in the buyer side of the supply chain or supply network of Eskapet Ambalaj San. ve Tic. A.Ş. is adding value and therefore costs. The more tiers, the more expensive the product gets. Supply chains are normally not very transparent, trade secrets are part of the survival tactics in each stage of the value chain, especially for trading companies.

If e.g. a Tier-1 buyer from Eskapet Ambalaj San. ve Tic. A.Ş. that primarily trades products and doesn’t add any value (only fulfills the distributor function) it is possible to shorten the supply chain downstream giving a potential to optimize profit margins for Eskapet Ambalaj San. ve Tic. A.Ş.. A previous Tier-2 buyer now turns into a Tier-1 buyer, which we call "go-direct". In our tool Supply chain Intelligence as far as international buyers are concerned, this analysis can be done with one click:

Analyze the potential to shorten the supply chain and optimize the profit margins on the sales side of Eskapet Ambalaj San. ve Tic. A.Ş.

Each company contributes significantly minimizing risks for its buyers, through its own stability. Internal risks (endogenous factors) can be e.g. financially (financial ratios, free cash flow, balance sheets) or operationally (production, lead times). Since 2021, external risks have increased due to worldwide shortages and are an important factor as to whether a supplier such as Eskapet Ambalaj San. ve Tic. A.Ş. can itself reliably deliver due to external dependencies (exogenous factors).

To assess this, data analysis should be conducted to get practical answers:

Which buyers does Eskapet Ambalaj San. ve Tic. A.Ş. consistently sell to over a long period of time that can be identified as a good reference?

The more constant outgoing shipments of a company’s, the easier it is to assess potential problems for a supplier like Eskapet Ambalaj San. ve Tic. A.Ş.

Operational aspects like a stable supply chain, an in-house production and reliable logistics define sustainable performance.

Since 2021, global supply shortages have increasingly added external factors as to whether a supplier like Eskapet Ambalaj San. ve Tic. A.Ş. can deliver reliably itself through dependencies.

Based on the statistical trend of shipments (in terms of the number of shipments and respectively the quantity of goods) the current supply and performance capacity can be indirectly analyzed.

Here you can see an analysis of shipments by Eskapet Ambalaj San. ve Tic. A.Ş. to international buyers in the last few months with Company Transparency

Generally you can differentiate the competition of Eskapet Ambalaj San. ve Tic. A.Ş. by the purchase and sales perspective.

• Start the competitive analysis on the purchase side.
• Start the competitive analysis on the sales side.

Competitors of Eskapet Ambalaj San. ve Tic. A.Ş. on the purchase side (procurement of raw materials and components for production or distribution) are exposed on ABRAMs wiki under Competitive Intelligence, purchased products, classified by HS-Codes (e.g. 392330) or by top product terms.

Competitors on the sales side of Eskapet Ambalaj San. ve Tic. A.Ş. (selling raw materials or components for production or distribution) are exposed on ABRAMS wiki under Competitive Intelligence, sold products classified by HS-Codes (e.g. 392330, 391910) or by top product terms.