Barem Ambalaj San. ve Tic. A.Ş.

Generally you can differentiate the supply chain or supply network of Barem Ambalaj San. ve Tic. A.Ş. by two perspectives:

• The supplier side (a so-called Tier-1-supplier is a direct supplier, Tier-2 is a supplier of the Tier-1 supplier, Tier-n is a supplier at any level in the Barem Ambalaj San. ve Tic. A.Ş. supply network).
• The buyer side (a so-called Tier-1 buyer is a direct buyer, Tier-2 is a buyer of the Tier-1 buyer, Tier-n is a buyer at any level in the Barem Ambalaj San. ve Tic. A.Ş. distribution network).

To ensure business stability and continuity, a supply chain or supply network must be constructed in such a way that external influences can cause as little damage as possible to Barem Ambalaj San. ve Tic. A.Ş.. This applies both in the area of procurement (the loss of a supplier must be covered by an alternative supplier) as in the area of sales (the loss of a buyer must be covered by an alternative buyer).

Risks can generally be considered as the non-availability of goods, through cutback or complete halt of production, or the potential loss of business partners, violating compliance rules (e.g. protection of the environment, labor legislation) and thus drop out of the supply network.

This risk should not necessarily be limited to the direct business partner (Tier 1), it involves the entire supply chain, unless sufficient alternative suppliers and buyers have been put in place.

Get an overview of the international supply chain of Barem Ambalaj San. ve Tic. A.Ş. (upstream/procurement and downstream/sales) from Tier-1 to Tier-n

E.G.: Tier-1 Buyer Pt. Danke Mitra Niaga

ABRAMS world trade wiki not only shows direct suppliers and customers of the first tier (Tier-1). With just one click in our tool Supply Chain Intelligence you get a comprehensive insight into the supply network with multiple tiers (Tier-n) beyond the first tier.

Each tier in the supply chain or supply network on the supplier side of Barem Ambalaj San. ve Tic. A.Ş. involves a single risk. The more tiers, the more difficult it is to analyze and monitor the business partners. Suppliers of suppliers are generally unknown, so there is already an increasing risk at the second (Tier 2) level.

If e.g. a first Tier supplier is not adding any value, the supply chain can be shortened and the risk of failure can be minimized by skipping this supplier. A previous Tier-2 supplier now turns into a Tier-1 supplier, which we call "go-direct". In our tool Supply Chain Intelligence as far as international suppliers are concerned, this analysis can be done with one click:

Analyze the potential of shortening and therefore stabilizing the supply chain of Barem Ambalaj San. ve Tic. A.Ş.

Based on the analysis of international bills of lading (bill of lading/ bills of lading/ BOL), a total of 3 different product categories that have been purchased by Barem Ambalaj San. ve Tic. A.Ş., can be identified.

These are classified by means of HS codes (HTS codes or customs tariff numbers).

For example, HS code 480519 classifies the following products:

„Fluting paper, uncoated, in rolls of a width > 36 cm or in square or rectangular sheets with one side > 36 cm and the other side > 15 cm in the unfolded state (excl. semi-chemical fluting paper and straw fluting paper)". This HS code was sighted 8 times in total.

Get an overview of internationally purchased products by Barem Ambalaj San. ve Tic. A.Ş. with Company Transparency

The performance of a company depends fundamentally on its buyers. Therefore, a largest possible base of stable buyers is crucial. A total of 19 international buyers of Barem Ambalaj San. ve Tic. A.Ş. could be identified in bills of lading. For example, one of the buyers is the company Pt. Danke Mitra Niaga, which has received 2 shipments.

Among 5 identified buying countries, an important target country to sell products to is: United States of America. 27 shipments of goods were shipped to this country in the period covered.

Get an overview of the international sales and its 19 buyers of Barem Ambalaj San. ve Tic. A.Ş. with Company Transparency.

Based on the analysis of international bills of lading (bill of lading/ bills of lading/ BOL), a total of 2 different product categories sold by Barem Ambalaj San. ve Tic. A.Ş., can be identified.

These are classified by means of HS codes (HTS codes or customs tariff numbers).

For example, HS code 481910 classifies the following products:

„Cartons, boxes and cases, of corrugated paper or paperboard". This HS code was sighted 32 times in total.

Get an overview of internationally sold products by Barem Ambalaj San. ve Tic. A.Ş. with Company Transparency

Each tier in the buyer side of the supply chain or supply network of Barem Ambalaj San. ve Tic. A.Ş. is adding value and therefore costs. The more tiers, the more expensive the product gets. Supply chains are normally not very transparent, trade secrets are part of the survival tactics in each stage of the value chain, especially for trading companies.

If e.g. a Tier-1 buyer from Barem Ambalaj San. ve Tic. A.Ş. that primarily trades products and doesn’t add any value (only fulfills the distributor function) it is possible to shorten the supply chain downstream giving a potential to optimize profit margins for Barem Ambalaj San. ve Tic. A.Ş.. A previous Tier-2 buyer now turns into a Tier-1 buyer, which we call "go-direct". In our tool Supply chain Intelligence as far as international buyers are concerned, this analysis can be done with one click:

Analyze the potential to shorten the supply chain and optimize the profit margins on the sales side of Barem Ambalaj San. ve Tic. A.Ş.

Each company contributes significantly minimizing risks for its buyers, through its own stability. Internal risks (endogenous factors) can be e.g. financially (financial ratios, free cash flow, balance sheets) or operationally (production, lead times). Since 2021, external risks have increased due to worldwide shortages and are an important factor as to whether a supplier such as Barem Ambalaj San. ve Tic. A.Ş. can itself reliably deliver due to external dependencies (exogenous factors).

To assess this, data analysis should be conducted to get practical answers:

Which buyers does Barem Ambalaj San. ve Tic. A.Ş. consistently sell to over a long period of time that can be identified as a good reference?

The more constant outgoing shipments of a company’s, the easier it is to assess potential problems for a supplier like Barem Ambalaj San. ve Tic. A.Ş.

Operational aspects like a stable supply chain, an in-house production and reliable logistics define sustainable performance.

Since 2021, global supply shortages have increasingly added external factors as to whether a supplier like Barem Ambalaj San. ve Tic. A.Ş. can deliver reliably itself through dependencies.

Based on the statistical trend of shipments (in terms of the number of shipments and respectively the quantity of goods) the current supply and performance capacity can be indirectly analyzed.

Here you can see an analysis of shipments by Barem Ambalaj San. ve Tic. A.Ş. to international buyers in the last few months with Company Transparency

Generally you can differentiate the competition of Barem Ambalaj San. ve Tic. A.Ş. by the purchase and sales perspective.

• Start the competitive analysis on the purchase side.
• Start the competitive analysis on the sales side.

Competitors of Barem Ambalaj San. ve Tic. A.Ş. on the purchase side (procurement of raw materials and components for production or distribution) are exposed on ABRAMs wiki under Competitive Intelligence, purchased products, classified by HS-Codes (e.g. 480519, 480591) or by top product terms.

Competitors on the sales side of Barem Ambalaj San. ve Tic. A.Ş. (selling raw materials or components for production or distribution) are exposed on ABRAMS wiki under Competitive Intelligence, sold products classified by HS-Codes (e.g. 481910, 481920) or by top product terms.